The Austrian
Calibration Measurement Software Company
light an radiation applications since 1998
Calibration Measurement Software Company
light an radiation applications since 1998
LANGUAGE
IL 6/7/8 light sources
The IL6/7/8 range of modular light sources offers a flexible means of configuring single, double, and triple light sources covering the spectral range 200nm to 30µm.
A variety of different lamps types and power ratings, specified separately, can be fitted into the lamp housings.
The 'S' version lamp housings are stand-alone single source units whereas the 'D' and 'T' version are used in conjunction with the IL-DSC dual source changeover unit and the IL-TSC triple source changeover unit respectively.
Although primarily designed for use with Bentham's range of monochromators and spectrometer systems, these light sources can be readily incorporated into most optical and spectroscopic set-ups requiring highly stable, focused broadband illumination. All of the light sources can be directly mounted onto any Bentham monochromator, collimator, fibre optic bundle and other accessories.
An efficient, dual-element lens (f/1 input, f/4 output) precisely matches the acceptance cone of the monochromator thus maximising light transfer while minimising scattered light.
The 218 Optical Chopper can also be directly attached.
The IL6x and IL8x housings are essentially the same except for the lens assembly materials which are selected to match the various spectral ranges as defined in the table below.
The IL7 is a special version of the IL6x. It is alsways fitted with a 150W Xe lamp and incorporates the required ignitor circuitry for this type of lamp.
A variety of different lamps types and power ratings, specified separately, can be fitted into the lamp housings.
The 'S' version lamp housings are stand-alone single source units whereas the 'D' and 'T' version are used in conjunction with the IL-DSC dual source changeover unit and the IL-TSC triple source changeover unit respectively.
Although primarily designed for use with Bentham's range of monochromators and spectrometer systems, these light sources can be readily incorporated into most optical and spectroscopic set-ups requiring highly stable, focused broadband illumination. All of the light sources can be directly mounted onto any Bentham monochromator, collimator, fibre optic bundle and other accessories.
An efficient, dual-element lens (f/1 input, f/4 output) precisely matches the acceptance cone of the monochromator thus maximising light transfer while minimising scattered light.
The 218 Optical Chopper can also be directly attached.
The IL6x and IL8x housings are essentially the same except for the lens assembly materials which are selected to match the various spectral ranges as defined in the table below.
The IL7 is a special version of the IL6x. It is alsways fitted with a 150W Xe lamp and incorporates the required ignitor circuitry for this type of lamp.
Lamp Types
| For use in... | Lamp Type | Recommended Spectral Range | Operating Current | Recommended p.s.u. | |
| 6/100W | IL6S/D/T | 100W quartz halogen | 250 - 2500nm | 8.5A | 605 |
| 6/150W | IL6S/D/T | 150W quartz halogen | 250 - 2500nm | 6.3A | 605 |
| 6/250W | IL6S/D/T | 250W quartz halogen | 250 - 2500nm | 10.4A | 605 |
| 6/DEUT | IL6S/D/T | 30W deuterium | 200 - 400nm | - | 705 |
| 8/GB | IL8S/D/T | Glowbar | 3 - 30µm | 8.5A | 605 |
| 8/NERNST | IL8S/D/T | Nernst element | 3 - 30µm | 8.5A | 605 |
| Supplied as part of IL7x | IL7S/D/T | 150W Xe | 200 - 1100nm | 8.5A | 605 |
