IL1Btn.jpg

IL1

General purpose, 100W quartz halogen based light source, 350nm to 2500nm
 
 
 
 
 
 
IL678Btn.jpg

IL6/7/8

Modular light source housings for deuterium, QH, xenon, Hg and infrared lamps, 200nm to 30µm
 
 
 
 
 
 
IL10Btn.jpg

IL10

Fully enclosed QH light source, Bentham manufactures a range of fully light-tight lamp housings and accessories, such as filter wheels, for use in dark environment applications, e.g. detector responsivity, CCD characterisation.

 
 
 
 
 
 
IL75XeBtn.jpg

IL75E

The IL75E is an ellipsoidal reflector based 75W xenon lamp. It is designed to optimise the light launched into a monochromator, integrating sphere or fibre optic bundle.
Typically, it proves more efficient than lens based xenon sources rated up to 500W. The lamp starter is integrated; 605 power supply is recommended.
 
 
 
 
 
 
IL-SOLARBtn.jpg

IL-SOLAR

Bentham manufactures a range of small area, typically less than 10cm2 , solar simulator sources including artificial 'sky' and 'direct sun'. These sources are routinely used for solar cell characterisation, display contrast ratio measurement, and photochromic material testing.
 
 
 
 
 
 
US4_6_8Btn.jpg

US-4/6/8

The US-4/6/8 are a family of integrating sphere (100mm to 200mm dia.) based uniform sources primarily designed for calibrating and characterising digital cameras, CCDs and PDAs.

Options/accessories include:

  • interchangeable apertures for calibrated radiance/luminance levels
  • monitor detector for radiance/luminance and colour temperature
  • C-mount and T-mount output port
  • filters - manual changeover and filter wheel based
  • spectral calibration certificate
 
 
 
 
 
 
ULS300Btn.jpg

ULS300

Variable Uniform Light Source
 
 
 
 
 
 
FLSXeQHBtn.jpg

FLS-XeQH

Filter Based Programmable Light Source
 
 
 
 
 
 

Power Supplies

Nearly each of the light sources listed above require one of our power supplies.
 
 
 
 
 
 
 
WLS100Btn.jpg

WLS100

The WLS100 is a general purpose fibre coupled white light source. It is designed to maximise the coupling of broad band light into terminated fibre optics (FC, SAM, etc). It incorporates a constant current driven 100W QH lamp running at approx. 3200K. Its' useful spectral range is 350nm to 2500nm.
 
 
 
 
 
 
FSM150XeBtn.jpg

FSM150Xe

Fast-scanning monochromator with Xe source
 
 
 
 
 
 
muellerlight.jpg

High Power Light Sources

We also deliver state of the art light sources for use in research, industry and medicine from MÜLLER ELEKTRONIK OPTIK.
 
 
 
 
 

©2007 CMS -
Ing. Dr. Schreder GmbH
> Legal/Privacy
Lofererstrasse 32
6322 Kirchbichl
Austria
Tel.: +43 (0)5332 77056-00
Fax.: +43 (0)5332 77056-14
info@schreder-cms.com
Valid XHTML 1.0 Strict